Coban GPS303B

Coban Gps303b

Connection Parameters

Server Address server.gp-s.net
Server IP 136.244.102.118
Server Port 47750
Desteklenen Fonksiyonlar
95%
Otomatik Aktivasyon
100%
Sunucu Uptime
99%

Bu cihaz sistemimiz ile uyumludur, Eğer bu model bir cihaza sahipseniz cihazınızı online otomatik aktivasyon ile sistemimize transfer ederek, GP-S.Net ‘in ekonomik tarifeleri ile tasarruf eder ayrıca tüm özelliklerinden ve mobil uygulamalarından faydalanabilirsiniz.

Açıklama

Coban GPS303 series are budget GPS trackers for vehicles. By November 2015 the family include three modifications with postfixes B, F and G in their names:

  • Coban GPS303B ? the basic model, which has just three wires to connect: two for power and one for ACC status.
  • Coban GPS303F ? advanced model with multiple inputs and outputs (I/O).
  • Coban GPS303G ? similar to GPS303F, but also includes remote control for managing the alarm mode, engine cut relay and send emergency alarm.

GPS303 ?B? MODIFICATION

The modification with ?B? postfix is the basic model of the GPS303 series. With only three wires for power supply and ACC status, it does not provide the possibility to connect any other sensors or buttons, control external equipment.

GPS303B has built-in GPS and GSM antennas, dust and waterproof design.

 

LOCATION AND TRACKING

All GPS303 models are embedded with GPS chip NewStar 1315 and don?t have support of GLONASS or alternative systems.

There are only two basic tracking mode, which do not provide too much flexibility: by time interval and by distance.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Also, the tracker supports turnings. It will update the positions automatically to web server once the direction is changed over pre set angle (30 degrees) to form a smooth trajectory consistent with the actual road, this function is only effective in GPRS mode.

MOBILE NETWORKS

With Quad-band GSM 2G module GPS303B can be operated all over the world.

POWER SUPPLY

External power supply might be 12V or 24V, which makes possible to install GPS303 both on cars and vans.

GPS303 also features a built-in rechargeable backup battery. When fully charged it ensures about 3-4 hours of device operation (in normal conditions).

LOCAL AND REMOTE MANAGEMENT

GPS303 trackers can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED INDICATION

GPS303 has three LED indicating:

    • Backup battery charge
    • GSM/GPRS mode
    • GPS signal reception
General information
Purpose Vehicle
Installation Professional
Housing
Size 96x53x16 mm (3.78×2.09×0.63 in)
Weight 70 g (2.47 oz.)
Waterproof class IP6X
GNSS Location
GPS
Chipset NewStar, NS-1315
Internal antenna (GNSS)
External antenna (GNSS)
Assisted GPS
Connectivity
Cellular network type GSM Quad Band
Cellular network generation 2G
Internal antenna (Connection)
External antenna (Connection)
Interfaces
RS232 interface
RS485 interface
ACC/Ignition input Feature already supported
Discrete inputs Feature already supported
Analog inputs Feature already supported
Impulse inputs
Frequency inputs
Number of inputs (all types) 4
Outputs Feature already supported
Number of outputs 2
Hardware features
Built-in battery
Battery capacity 700 mAh
Emergency button Feature already supported
Detach sensor
Engine block relay Feature already supported
Non-volatile memory Optional
Hardware extras
Fuel level sensor reading Feature already supported
Fuel temperature sensor reading
Driver ID reading
Voice listening Feature can be supported upon request
Wireless keypad Optional Feature already supported
Engine block special control Feature already supported
Emergency button Feature already supported
Tracking features
Tracking modes Continuous
Smart power consumption
Odometer
ECO driving
Location by Cell ID Feature already supported
Events monitoring
External power cut off Feature already supported
Battery low Feature already supported
Device switched on/off
Self monitoring
Network signal level
GNSS signal level
GNSS satellites fixed
External power source voltage
CAN/OBDII reading
CAN/OBDII reader type
Check engine light
Remote management
Server connection setup over SMS Feature already supported
Device ID type Static (IMEI)
Remote device configuration Yes (over GPRS)
Forced GNSS location update over SMS Feature can be supported upon request
Forced LBS location update over GPRS
Message exchange format ASCII
Firmware update OTA
Certification
CE
FCC

Bu cihazı başka bir yerden satın aldım sisteminizi kullanabilirmiyim?

Evet, cihazınızı kolaylıkla sistemimize aktarabilir ve mobil uygulamalarımız dahil tüm özelliklerinden faydalanabilirsiniz.

Cihazımı nasıl GP-S.Net ' e transfer edebilirim?

Bu konuda endişelenmeyin GP-S.Net’ in benzersiz otomatik aktivasyon özelliği sayesinde herşey online ve otomatik olarak gerçekleşir.

Aktivasyon yada transfer işlemi ne kadar sürer?

Sadece bir kaç dakika sürmektedir, cihazınızı sökmeniz yada bilgisayara bağlamanız vb. işlemler gerektirmez, otomatik aktivasyon çok kolaydır, herhangi bir teknik bilgi gerektirmez ama olurda yardıma ihtiyaç duyarsanız bizimle irtibata geçin tüm işlemleri sizin adınıza yapabiliriz.

Sepetiniz şu anda boş.

Mağazaya geri dön